TECHNICAL DATA

// OMNICAN GATEWAY DATASHEET

The OmniCAN Gateway is a high-performance CAN-to-BLE bridge engineered for reliability and precision. This datasheet outlines the technical parameters and environmental requirements for the hardware. --- ## 1. ELECTRICAL PARAMETERS | PARAMETER | SPECIFICATION | NOTES | |:---|:---|:---| | **SUPPLY VOLTAGE** | 9V – 19V DC | | | **SUPPLY CURRENT** | < 1A | Under full load | | **CAN CONTROLLER** | MCP2518FD CAN controller | Highly flexible filtering allows for power and latency optimisation | | **CAN BAUD RATE** | 1Mbps | Fixed for Haltech compatibility | | **PROTECTION** | Reverse Polarity, Surge and over voltage Protected | | --- ## 2. PERFORMANCE ARCHITECTURE | PARAMETER | SPECIFICATION | BENEFIT | |:---|:---|:---| | **SYSTEM TYPE** | **Asymmetric Multi-Processing (AMP)** | Parallel task execution with zero jitter | | **PRIMARY COMPUTE** | **Dual-Core High-Performance RISC-V** | Dedicated high-speed CAN-to-ECU logic | | **CLOCK SPEED** | **Up to 400MHz** | Ultra-low latency communication | | **COMMS SUB-SYSTEM** | **Wireless Management Co-Processor** | Isolated Bluetooth stack for max reliability | | **LOGIC ISOLATION** | **Hardware-Level Task Separation** | Critical data is never delayed by radio events | --- ## 3. WIRELESS & COMMUNICATION | PARAMETER | SPECIFICATION | |:---|:---| | **CONNECTIVITY** | Bluetooth Low Energy (BLE) 5.0 | | **MAX RANGE** | Up to 30m (Obstacle-free) | | **SECURITY** | Powercycle based dedicated pairing mode | | **NODE EMULATION** | Haltech 3x5 CAN Keypad | | **PROTOCOL** | Haltech CAN Protocol (Elite/Nexus ECU) | --- ## 4. PHYSICAL & ENVIRONMENTAL | PARAMETER | SPECIFICATION | |:---|:---| | **HOUSING** | Automotive grade SLS Nylon | | **HOUSING SEAL** | **NON-SEALED (NOT IP-RATED)** | | **OPERATING TEMP** | -40°C to +80°C (-40°F to +176°F) | | **CONNECTOR** | Amphenol ATM 4 pin (DTM compatible) | | **HARNESS WIRE** | 22AWG Tefzel Spec 55 (M22759/32) | | **INSTALLATION LOCATION** | **Interior Cabin Only** | --- ## 5. SOFTWARE FEATURES - **GAUGE DISPLAY:** Real-time monitoring of any channel in the Haltech ECU protocol. - **KEYPAD CONTROL:** 15 customizable virtual buttons with per-button RGB LED status indicators. - **SYNC LOGIC:** Robust ECU reboot detection and auto-synchronization preventing synchronization errors. - **AUTO-CONNECT:** Automatic BLE reconnection for a seamless user experience. - **OTA FIRMWARE:** Bluetooth-based Over-The-Air updates. Simply connect the app and update the gateway firmware. ---